Start my brief
1 km
Claremont — 3.87 km². Boundary from the ABS Australian Statistical Geography Standard 2021, simplified. The same boundary every figure on this page was read against.

WA · Western Suburbs Perth

Home builders in Claremont

Construction leads every industry in Australia for insolvencies. Before you hand anyone a deposit in Claremont, we check their licence with Building and Energy WA, sight their insurance, confirm they are still trading — and match you to the one who actually builds on blocks like yours.

Start my brief — free Free · 3 minutes · no phone number to start
  • Costs you nothing, ever
  • No obligation to use them
  • Details never sold
Town of ClaremontClaremont Local Planning Scheme No. 3 Knockdown rebuild
2,361Construction companies entered external administration in 2024–25 — more than any other industry in Australia (ASIC)
2Residential zones mapped in Claremont — the control that decides what may be built
3.87Square kilometres of Claremont, read parcel by parcel from Landgate SLIP

Why this is harder than it looks in Claremont

Have us check instead — free →

The mechanism

Four checks, before anyone reaches you

Every one of them is something you could do yourself. What we sell is that it has been done, dated and published — and repeated on a schedule, because a check that happened once is worth nothing.

  • 01 · Licence

    Looked up on Building and Energy WA's own public register — number, class and status, with the date we looked recorded.

  • 02 · Insurance

    Public liability plus whatever warranty or indemnity cover WA requires. Sighted by us, not self-declared on a form.

  • 03 · Still trading

    Solvency re-checked on a schedule. A licence stays current right up until the day a company fails.

  • 04 · Works in Claremont

    Confirmed with the builder against the suburbs they genuinely service — not a radius drawn on a map.

Have us run the check — free →

What you are dealing with in Claremont

Six things a builder prices differently. This is the suburb-level picture — which of them reaches your block is an address check.

What is mapped in Claremont

Read from Landgate SLIP, not a summary of it.

Council
Town of Claremont
Planning scheme
Claremont Local Planning Scheme No. 3
Residential zones mapped
Development
Residential
Bushfire-prone land
Mapped in this suburb
Urban growth area
Yes
R-Code density
R10 to R160 · R-AC1, R12.5

Planning data from Landgate SLIP (CC BY 4.0), read 2026-09-14. Suburb-level, not a report on your block — check your address on the WA planning scheme maps.

Builders serving Claremont

None verified in Claremont yet. We will not list one we have not checked — give us the brief and we will go and find one. Tell us what you're building →

What building in Claremont actually involves

Claremont is coded up to R160 — the highest residential density code we have published anywhere in Australia. Against that, parts of the same 3.87 km² town are coded R10. Understanding what sits at each end explains most of what can happen here.

R160 is apartment density, expressed as a house-lot number

The R-code is dwellings per hectare. R160 is one hundred and sixty of them — arithmetically around 60 m² of site area per dwelling, which is not a house on a block in any sense. It describes apartment development, and it exists on specific land near the station and the town centre rather than on residential streets. R10, at the other end, is roughly a thousand square metres per dwelling. The two are separated by a factor of sixteen and by a few hundred metres.

What that means for a homeowner

Not much on your own block, unless you happen to be on the R160 land. A great deal on the land around you. In a town where twelve codes run from R10 to R160 across under four square kilometres, the code on the parcel behind and beside your own is the number that decides what your outlook will be in ten years, and it is a free search. Anyone buying for a view, for light, or for quiet should run it on the neighbours before running it on themselves.

Split codes, and the two that matter

R15/20 and R30/40 are mapped. A split code names two densities; only the lower one is live until a condition written into the scheme has been met. Neither of these is a dramatic gap — a step rather than a transformation — but if the higher figure is the reason for a purchase, confirm with the Town which applies to the lot and what the condition is.

Four structure plans, and one unusual instrument

The Claremont North East Precinct and Claremont Town Centre Precinct Structure Plans are in force, together with a Claremont Showground Management Plan — which is a different kind of document. A management plan for a large public site governs how that land is used and developed over time rather than setting lot-level development rules, and for a neighbour it is the document that says what is intended for the site next door. Across the endorsed plans, roughly 1,606 dwellings are anticipated on land in Claremont.

Bushfire, in an inner suburb

Part of Claremont sits inside a designated Bush Fire Prone Area, mapped across seven areas — a high count for a built-up western suburb, and a reminder that the mapping follows vegetation rather than remoteness. A block inside one is assessed on its own vegetation and slope, and that assessment sets the construction standard.

Coastal sand, and an old river suburb's ground

The site classification from a test on the specific lot is what sets the footing system. On the sand profiles of the western suburbs that is usually straightforward, but proximity to the river flats changes the answer, and two lots a few streets apart can classify differently. Treat any slab figure quoted before the test as provisional.

What to establish first in Claremont

The code on your own lot and, just as importantly, on the land behind and beside it — because the range runs R10 to R160 across a very small town. Then whether a structure plan or the showground management plan covers or adjoins the land. Then, on split-coded land, which figure applies. Then the bushfire assessment and the site classification.

What to ask a builder about a block in Claremont

Each one is here because of something mapped in Claremont. Take them to whoever quotes.

  1. 01

    Which of the 2 residential zones mapped in Claremont covers this address, and what does that one permit that the others do not?

  2. 02

    What bushfire attack level have you built to in Claremont before, and what did it change in the glazing, decking and screening?

  3. 03

    What R-code is this block, and what does it set for minimum and average site area per dwelling?

  4. 04

    Does the Claremont North East Precinct Structure Plan apply to this lot, and what does it change about layout or staging?

Local landmarks in Claremont

Named plans that apply in Claremont

Structure plans covering land here, as the authority names them. Which one governs your lot decides its density, layout and staging — check the address before you assume the zone alone sets the rules.

Source: catalogue.data.wa.gov.au/dataset/local-planning-schemes, read 2026-09-14.

Questions about building in Claremont

What does R160 mean?

One hundred and sixty dwellings per hectare — arithmetically around 60 m² of site area each, which is apartment development rather than houses on blocks. It applies to specific land near the station and town centre, not to residential streets.

Should I check the code on my neighbours’ land?

Yes, and it may matter more than your own. Twelve codes run from R10 to R160 across under four square kilometres, so the code on the parcel behind and beside you decides your outlook in ten years. It is a free search.

What do the split codes offer?

R15/20 and R30/40 are mapped. Only the first number is live until a condition written into the scheme has been satisfied. Neither gap is dramatic — a step rather than a transformation — but confirm with the Town if the higher figure is the reason for buying.

What is the Showground Management Plan?

A different kind of instrument from a structure plan. It governs how a large public site is used and developed over time rather than setting lot-level rules — for a neighbour, it is the document that says what is intended for the site next door.

Why is there bushfire mapping in an inner suburb?

Because the mapping follows vegetation rather than remoteness. Seven bushfire-prone areas are mapped across Claremont, and where a block is inside one the construction standard follows an assessment of the specific site.

How this works

  1. 01
    Tell us about the build

    Six questions, about three minutes.

  2. 02
    We match it against Claremont

    Against the 2 residential zones mapped here, bushfire-prone land, growth-area status — and against which builders hold the right licence class for it, have done it before, and actually work under Town of Claremont.

  3. 03
    One recommendation, with the reasoning

    Not six quotes to sift. We negotiate on your behalf; you deal with the builder directly. Builders pay us, only once you sign.

No catch

What you are agreeing to

  • Nothing. There is no contract with us, no account to create, no card, and nothing to cancel.
  • No obligation to use whoever we recommend. Take the name and the reasoning and do what you like with it, including nothing.
  • No phone number needed to start. Give us one if you want to be called; otherwise we write.
  • One builder contacts you, not six. And only after you have seen the brief and said yes.
  • Your details go to that builder and nobody else. Never sold, never auctioned, never shared with a panel.
  • If we have nobody in Claremont, we say so. That is a real answer we give, and the empty builder list above is the proof we mean it.

Building in Claremont?

Licence checked with Building and Energy WA, insurance sighted, still trading, genuinely working in Claremont. If we cannot find one worth recommending, we will say so.

Start my brief →

Free · about 3 minutes · no obligation · your details are never sold