SA · Eastern & Coastal Adelaide
Home builders in Unley
Construction leads every industry in Australia for insolvencies. Before you hand anyone a deposit in Unley, we check their licence with Consumer and Business Services, sight their insurance, confirm they are still trading — and match you to the one who actually builds on blocks like yours.
- Costs you nothing, ever
- No obligation to use them
- Details never sold
Why this is harder than it looks in Unley
- A current licence tells you nothing about solvency
External administrators lodged 2,361 initial reports for construction companies in 2024–25 — more than any other industry in the country (ASIC Insolvency Statistics, Series 3.1). Every one of those companies held a valid licence the day before. The certificate on the wall says they are permitted to build. It does not say they can pay their framer on Friday.
- Unley is not a generic block
Mapped here: 6 residential zones, 6 overlay families, 71 heritage records. A builder who prices the house and discovers the site is a builder whose quote moves — and the variations land on you, not on them. The ones who work Unley regularly already know which of these reach which streets.
- "Get three quotes" sells you, not the builder
The standard model charges builders per enquiry and sends the same one to several of them. You are the product, the fastest caller wins, and nobody in that chain has checked whether any of them is solvent. We do not sell enquiry data — not to a panel, not to a lead broker, not ever.
The mechanism
Four checks, before anyone reaches you
Every one of them is something you could do yourself. What we sell is that it has been done, dated and published — and repeated on a schedule, because a check that happened once is worth nothing.
- 01 · Licence
Looked up on Consumer and Business Services's own public register — number, class and status, with the date we looked recorded.
- 02 · Insurance
Public liability plus whatever warranty or indemnity cover SA requires. Sighted by us, not self-declared on a form.
- 03 · Still trading
Solvency re-checked on a schedule. A licence stays current right up until the day a company fails.
- 04 · Works in Unley
Confirmed with the builder against the suburbs they genuinely service — not a radius drawn on a map.
What you are dealing with in Unley
Six things a builder prices differently. This is the suburb-level picture — which of them reaches your block is an address check.
- Bushfire Not mapped BAL assessment; glazing, decking and screening spec.
- Flood Mapped Sets a minimum floor level. Flood report first.
- Heritage 71 records Impact statement; limits demolition, form and materials.
- Slope Not mapped Geotech report before footings can be priced.
- Soil None mapped Below trigger depth: management plan, treatment, disposal.
- Density controls 6 zones What may be built, and how much. Set parcel by parcel.
What is mapped in Unley
Read from Planning and Design Code via SAPPA (PlanSA), not a summary of it.
- Council
- City of Unley
- Planning scheme
- Planning and Design Code
- Overlays mapped here
- Hazards (Flooding — High) · Hazards (Flooding — General) · Historic Area Overlay · Local Heritage Place · State Heritage Place · Regulated and Significant Tree
- Residential zones mapped
- Business Neighbourhood
Established Neighbourhood
General Neighbourhood
Housing Diversity Neighbourhood
Urban Corridor (Boulevard)
Urban Renewal Neighbourhood - Bushfire-prone land
- None mapped
- Local Heritage Places
- 71
- Acid sulfate soils
- None mapped
- Minimum Frontage
- Minimum frontage for a detached dwelling is 15m
+5 other rules mapped in this suburb - Minimum Site Area
- Minimum site area for a detached dwelling is 500 sqm; semi-detached dwelling is 500 sqm; row dwelling is 500 sqm
+5 other rules mapped in this suburb - Maximum Building Height (Metres)
- 10.5m to 32.5m
6 different values mapped across the suburb - Maximum Building Height (Levels)
- 1 level to 9 levels
6 different values mapped across the suburb - Minimum Primary Street Setback
- 0m · 6m
- Minimum Side Boundary Setback
- Minimum side boundary setback is 1m for the first building level; 3m for any second building level or higher
- Site Coverage
- Maximum site coverage is 50 per cent
Planning data from Planning and Design Code via SAPPA (PlanSA) (CC BY 4.0), read 2026-09-14. Suburb-level, not a report on your block — check your address on the SA Property and Planning Atlas.
How Unley compares in Eastern & Coastal Adelaide
Overlay families mapped in each suburb we have read in this region. More mapped controls generally means more assessment before you can price a build.
Builders serving Unley
What building in Unley actually involves
Unley maps six residential and mixed zones across 1.5 km², and with them minimum site areas running from 150 m² to 750 m². A five-fold spread in how much land a dwelling needs, inside one suburb name, is the fact that governs everything else here.
Minimum site area is the subdivision gate
For anyone considering dividing a block or putting more than one dwelling on it, minimum site area is the number that decides whether the idea is possible at all. Seven separate rules are mapped in Unley. At the 750 m² end, a typical allotment supports one house and nothing more. At the 150 m² end, the same land could carry several dwellings. Between those two answers lies most of the value difference between otherwise similar properties — and the answer is not visible from the street, not inferable from what a neighbour did, and not constant across the suburb.
Read the rule for the dwelling type you actually want
South Australian minimum site areas are frequently written per dwelling type in the same rule — a detached dwelling, a semi-detached, a row dwelling, a group dwelling and a residential flat building can each carry a different figure. A block that cannot be divided for two detached houses may comfortably take two semi-detached or row dwellings. So the question is not "can this block be subdivided" but "what dwelling type does the applicable rule permit on this land, and at what area". Those are different questions with different answers.
Frontage is the second gate, and it is independent
Six minimum frontage rules apply, from 10 m to 18 m. Frontage and site area are assessed separately, so a resulting allotment must satisfy both — a deep, narrow block can meet the area requirement comfortably and fail on frontage. Where subdivision is the plan, run both calculations before anything else.
Height runs to 32.5 m and nine levels
Twelve height figures in metres are mapped alongside six in levels, from 10.5 m and one level up to 32.5 m and nine levels. As elsewhere in South Australia both caps apply and the more restrictive governs. The tall figures belong to the Urban Corridor (Boulevard) and Urban Renewal Neighbourhood zones rather than the residential streets — but on a 1.5 km² suburb those are never far away, so the height mapped on adjoining land is worth knowing if outlook matters.
Housing Diversity and Urban Renewal zones
Both are mapped, and the names describe intent: these are zones where the Code anticipates more and different housing than the established pattern. For an owner that cuts two ways — more scope on your own land if you are in one, and more change around you if you are beside one.
Setbacks and coverage
Primary street setbacks of 0 m and 6 m are both mapped — a wide difference. The side boundary setback is 1 m for the first level and 3 m above, with maximum site coverage of 50 per cent.
Heritage and trees
State Heritage Place, Local Heritage Place and Historic Area overlays are all mapped, along with a Regulated and Significant Tree overlay. The area overlay reaches unlisted houses, which is the case most often missed. Flooding is mapped in both the High and General bands somewhere in the suburb; whether either reaches a specific allotment is an address check.
What to establish first in Unley
The minimum site area and frontage for the address, and for the dwelling type you actually want. Then the zone, since six are mapped. Then the height figures on your land and the land beside it. Then the heritage overlays and the trees.
What to ask a builder about a block in Unley
Each one is here because of something mapped in Unley. Take them to whoever quotes.
- 01
Which of the 6 residential zones mapped in Unley covers this address, and what does that one permit that the others do not?
- 02
Have you had an application through City of Unley where a heritage control applied, and how long did the assessment take?
Local landmarks in Unley
- Sturt Bowling Club
- Unley Oval
- Adelaide Language and Multi-Cultural Centre
- Unley Civic Library
- Greenhill Road Tram Stop
- Unley Police Station
Questions about building in Unley
How much land does a dwelling need in Unley?
Anywhere from 150 m² to 750 m² — seven separate minimum site area rules are mapped across six zones in 1.5 km². At one end an allotment supports a single house; at the other the same land could carry several dwellings.
Can my block be subdivided?
That is the wrong question here. Minimum site areas are usually written per dwelling type in the same rule, so a block that cannot take two detached houses may comfortably take two semi-detached or row dwellings. Ask what dwelling type the applicable rule permits, and at what area.
Does frontage matter separately?
Yes, and it is assessed independently. Six frontage rules apply, from 10 m to 18 m, and a resulting allotment must satisfy both frontage and area — so a deep narrow block can meet the area comfortably and fail on frontage. Run both calculations first.
How tall can buildings be?
Twelve height figures in metres and six in levels are mapped, from 10.5 m and one level up to 32.5 m and nine levels. Both caps apply and the more restrictive governs. The tall figures belong to the corridor and renewal zones rather than residential streets.
What do the Housing Diversity and Urban Renewal zones mean?
That the Code anticipates more and different housing there than the established pattern. It cuts two ways — more scope on your own land if you are in one, and more change around you if you are beside one.
How this works
- 01Tell us about the build
Six questions, about three minutes.
- 02We match it against Unley
Against the 6 residential zones mapped here, 6 overlay families, 71 heritage records — and against which builders hold the right licence class for it, have done it before, and actually work under City of Unley.
- 03One recommendation, with the reasoning
Not six quotes to sift. We negotiate on your behalf; you deal with the builder directly. Builders pay us, only once you sign.
No catch
What you are agreeing to
- Nothing. There is no contract with us, no account to create, no card, and nothing to cancel.
- No obligation to use whoever we recommend. Take the name and the reasoning and do what you like with it, including nothing.
- No phone number needed to start. Give us one if you want to be called; otherwise we write.
- One builder contacts you, not six. And only after you have seen the brief and said yes.
- Your details go to that builder and nobody else. Never sold, never auctioned, never shared with a panel.
- If we have nobody in Unley, we say so. That is a real answer we give, and the empty builder list above is the proof we mean it.
Building in Unley?
Licence checked with Consumer and Business Services, insurance sighted, still trading, genuinely working in Unley. If we cannot find one worth recommending, we will say so.
Start my brief →Free · about 3 minutes · no obligation · your details are never sold